Spraying Rubber Asphalt Emulsion Waterproof Coating

• Customization: Available
• Property: Waterproofing
• Where to Use: Basement
• Model NO.: SR
• Customized: Yes
• Exposed Condition: UV Resistant
• Type: Waterproof Paint
• Ceiling Tile Shape: Liquid
• Material: Rubber
• Thickness: 0.8mm
• Surface Treatment: Spray Painted
• Function: Waterproof
• Certification: ISO, MSDS
• Color: Black
• Usage: Indoor
• After-sales Service: 3-5years
• Warranty: 3-5years
• Ceiling Tile Type: Bitumen
• Transport Package: Pails
• Specification: 180kg/barrel
• Trademark: EONZEAL
• Origin: China
• HS Code: 000000
• Production Capacity: 20000t
• Package Size: 20.00cm * 20.00cm * 30.00cm
• Package Gross Weight: 20.000kg

Product Description

               Spraying Rubber Asphalt Emulsion Waterproof Coating








 
Description
Spray grade asphalt rubber emulsion coating is made from exquisitely refined asphalt that is emulsified with cia yancj water.As water based flexible emulsion. It is specially designed for adhering and coating existing smooth surfaced roofs. The emulsion is sprayed onto the substrate using special equipment and reinforced with fabric that is simultaneously,which will dramatically improve tensile strength of cured emulsion.

Application
Suitable for all kinds of building structure of roof, wall, toilet bath room, basement, cold storage, bridge, railway roadbed, pool, underground pipeline and other seepage prevention, gas insulation bonding SBS coil engineering.

Package
180kg/drum, or customized as required.

Dosage 
Recommended dosage: 1.8kg/sqm·mm

Construction Guidance

1. The substrate must be intact,dry,clean and smooth,remove dust,dirt ans other contaminants that would interfere with a good bond.
2. Using low air pressure to spray proper quantity of emulsion to act as primer,the coverage is 150-200g/sqm.
3. Processed with next coat 1 hour later after the primer become fully cured(the time depends on climate)
4. The second coat can be sprayed only when the first coat become fully,cured and ensure each coats thickness to be uniform ans the surface to be smooth.
5. Prohibit walking onto the film within 4 hours after finishing spraying,it will take about 24hours to be thoroughly cured(depends on ambient climate)
6. Horizontally and vertically move the spray gun at appropriate speed till the thickness meets requirement.
7. Do not apply the emulsion onto water-immersed substrate and rainy day.

Storage and transportation
Storage temperature shall be from 5ºC to 40ºC, protect products from direct exposure under the sun or the rain, storage period within 6 months under normal condition.