Building Maintenance Indoor and Outdoor Waterproofing Acrylic Waterproof Coating

Product Description

                                            Concrete Roof Waterproof Acrylic Waterproof Coating for Interior and Exterior Waterproofing



DESCRIPTION
Acrylic waterproof coating is made up of acrylic ester and many polymer emulsions. It is a kind of one-component waterborne environmental polymer waterproof coating material.
Environmental protection water-based formula. This materials can be applied at exposure roof and concealed roof. It enjoy great popularity by customers for its simple installation.

PRODUCT INFORMATION

Product Name	Type	Color	Pail	Coverage	Packing
Acrylic Waterproof Coating	Exposed, non-exposed	White, grey, green or customized	20kg/pail neutral packing or OEM	The usage for 1.5mm thickness coating is about 2.6kg/m2.	Plywood Pallet

FEATURES

• Ready to use straight from the pail
• Stable performance
• UV resistant
• Water based
• Non-toxic, environmentally-friendly
• Available in many colors

TECHNICAL DATA SHEET

ITEM	STANDARD	RESULT
Appearance	White or grey liquid	/
Solid content,% ≥	65	72
Elongation,%≥	300	330
Surface drying time, h≤	4	2
Fully drying time, h≤	8	5
Tensile strength, MPa≥	1	1.5
Heating stretch rate, % ≤	1	0.6
Low temperature flexibility,ºC≤	-10 ºC no cracking	Pass

All measurements are taken at 22ºC and 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only.

SHELF LIFE
Do not store product exposed to weather and sun. When kept in a cool, dry and protect area, sealed pail have a 6 months shelf life.

SAMPLE

• We can provide small amount of sample for customer to test the quality, and the customer only need to pay for the shipping cost.

LEAD TIME

• The leasd time for a 20' container quantity is 7-10 days, for more quantity, we can discuss.

APPLICATION GUIDE


PRECAUTION

• Second layer is the thickest one, the third one is very thin, just for leveling.
• Interval time depends on the application site, but typically full drying time is about 20 hours.
• Fiber reinforcing layer is necessary for inside corner internal corner, floor drain, pipe joints etc, the lap width should not be less than 100mm, extensive application after joints treatment.
• Use PU out after opening, time within 8 hours. Long-term storage will cause the forming of a thin film on the surface. Remove this when application. Does not affect the performance of product.