| Customization: | Available |
|---|---|
| Certification: | ISO, MSDS |
| Material: | Rubber |
|
Still deciding? Get samples of US$ 1/kg
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Advantages
1. High solid content, more than 98%, no solvent or volatile matter.
2. Never be solidified. Always keep the state of creeping viscous paste, can resist the deformation of substrate.
3. Always keep excellent creeping property. Good self healing ability. Able to heal the concrete automatically, suitable for complex construction surface.
4. Strong adhesion to different kinds of substrates and membranes. Excellent bonding performance.
5. Can be used below -20ºC.
6. Wide range of application. It can be used on the wet surface without visible water and any other surface that made from various materials.
7. Easy to apply. Both brushing and spraying are ok.
Application scope
1. Roofs, balconies, terraces and verandas.
2. Wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms,etc.
3. Green roofs, flowerbeds, planter boxes.
4. Repair old bitumen felts, asphalt felts, EPDM and PVC membranes and old acrylic coatings.
5. Protection of polyurethane foam insulation.
6. Waterproofing and protection of concrete constructions like bridge-decks, tunnels, stadium stands, car parks, etc.
|
NO. |
Item |
Technical index |
|
|
1 |
Flashing point/ºC≥ |
180 |
|
|
2 |
Solid content/%≥ |
98 |
|
|
3 |
Adhesion strength |
Dry base |
100%Cohesion damage |
|
Wet base |
|||
|
4 |
Elongation/mm≥ |
15 |
|
|
5 |
Low temperature flexibility |
-20ºC,No crack |
|
|
6 |
Heat resistance/ºC |
65 |
|
|
No slip, flow or drop |
|||
|
7 |
Heat deterioration (70ºC,168h) |
Elongation/mm ≥ |
15 |
|
Low temperature flexibility |
-15ºC,No crack |
||
|
8 |
Acid resistance (2%H2SO4) |
Externals |
No change |
|
Elongation/mm ≥ |
15 |
||
|
Mass change/% |
±2.0 |
||
|
9 |
Alkali resistance [0.1%NaOH+Saturated Ca(OH)2 solvent] |
Externals |
No change |
|
Elongation/mm ≥ |
15 |
||
|
Mass change/% |
±2.0 |
||
|
10 |
Salt resistance (3%NaC1 Solvent) |
Externals |
No change |
|
Elongation/mm ≥ |
15 |
||
|
Mass change/% |
±2.0 |
||
|
11 |
Self healing |
No water penetration |
|
|
12 |
Stress relaxation/%≤ |
No treatment |
35 |
|
Heat deterioration(70ºC,168h) |
|||
|
13 |
Anti-water breakthrough/0.6MPa |
No waterproof breakthrough |
|
Application method
Non curing rubber bitumen waterproof coating has two application methods: Brushing and spraying. Select the suitable method according to substrate status. Check the spraying equipment before application. Make sure that the equipment is in good condition.
1. Clean up the substrate.
Use a broom or hair drier to clean up the substrate mortar and construction wastes. Acceptance of the surface should be smooth, solid, drainage slope comply with the design requirements. The substrate can be wet but cannot have visible water on the surface.
2. Detail parts additional layer construction.
The place such as roof rainwater mouth, roof tube roots, the inside and exposed corner of parapet and gutter firstly blade coating 2mm non curing rubber bitumen coating to make strengthen.
3. Painting on large area.
Both brushing and spraying are ok.
4. After brushing or spraying, paving SBS modified bituminous waterproof membrane in time to guarantee strong adhesion performance. The membrane should be laid straight, smooth and no wrinkle. Overlapping width is 100mm. Overlap parts adopt cold stick method, and then brush or spray coating.
5. Water-storing test.
After the completion of the waterproof layer, water storage experiment is carried out in accordance with the regulations. Storage 24 hours no leakage is qualified.
){kind=link}