Solvent Based Polyurethane Liquid (Water Proofing Membrane Manufacture in China)

• Customization: Available
• After-sales Service: 3-5years
• Certification: ISO, MSDS
• Model NO.: PU-1
• Thickness: 1.5mm
• Property: Waterproofing
• Where to Use: Roof
• Customized: Yes
• Exposed Condition: UV Resistant
• Type: Waterproof Paint
• Ceiling Tile Shape: Liquid
• Material: PU
• Surface Treatment: Film Coated
• Function: Waterproof
• Color: Grey
• Usage: Indoor
• Warranty: 3-5years
• Ceiling Tile Type: Polyurethane
• Transport Package: Pails
• Specification: 20kg/pail
• Trademark: EONZEAL
• Origin: China
• Production Capacity: 20000t
• Package Size: 20.00cm * 20.00cm * 30.00cm
• Package Gross Weight: 20.000kg

Product Description

    Solvent Based Polyurethane Liquid Water Proofing Membrane Manufacture in China


DESCRIPTION

Solvent based polyurethane waterproofing coating is a moisture-cured waterproof coating, form a seamless film by absorbing moisture from the air; with high flexibility and elongation, strong ability to substrates deformation, waterproof life up to 15 years.


FEATURES

• Ready to use straight from the pail
• Stable performance
• 540% high elongation
• Solvent based, can be compounded with high polymer membrane and self-adhesive modified bitumen waterproof membrane
• Non-toxic, environmentally-friendly
• Available in red, black or grey

TECHNICAL DATA

ITEM	STANDARD	RESULT
Appearance	Red or grey or black liquid	/
Solid content,% ≥	85	90.4
Elongation,%≥	500	542
Surface drying time, h≤	12	8
Fully drying time, h≤	24	20
Tensile strength, MPa≥	2	2.97
Tear strength, N/mm≥	15	26
Low temperature flexibility,ºC≤	-35 ºC no cracking	Pass

All measurements are taken at 22ºC and 50% relative humidity. Specifications vary
according to site conditions and should be taken as a guide only.


COVERAGE

Recommend dosage: 1.65 kg/sqm, 1mm thickness, total thickness no less than 1.5mm.


SHELF LIFE

Do not store product exposed to weather and sun. When kept in a cool, dry and protect area, sealed pail have a 12-months shelf life.


SURFACE PREPARATION

• All surfaces must  be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds, release agents and any other loose or contaminating material
• Prior to application, remove all sharp protrusions, which may pierce the membrane
• The external and internal corner are made to be arc.

         Internal corner: D≥ 50mm
         External corner: D≥ 10mm

APPLICATION GUIDANCE

• LEVELING: Substrate should be smooth and firm.

• CLEANING: No garbage, floating pulp on the substrate, keep it dry. Prime the concrete surface

• FIRST COATING: The first layer should be very thin, covering the substrate is enough, less than 0.5mm thickness.

• SECOND & THIRD COATING: Apply the second layer provided the first layer is cured. Coating direction is vertical to the first one and then the third layer`s direction is the same as the first one.

PRECAUTION

• Second layer is the thickest one, the third one is very thin, just for leveling.
• Interval time depends on the application site, but typically full drying time is about 20 hours.
• Fiber reinforcing layer is necessary for inside corner internal corner, floor drain, pipe joints etc, the lap width should not be less than 100mm, extensive application after joints treatment.
• Use PU out after opening, time within 8 hours. Long-term storage will cause the forming of a thin film on the surface. Remove this when application. Does not affect the performance of product.